A laptop is made in three handoffs. Specialist suppliers turn raw materials such as quartz, copper, bauxite, lithium and cobalt into chips, memory, screens, batteries and hundreds of smaller parts. An original design manufacturer (ODM), usually in mainland China or Southeast Asia, builds the motherboard, assembles and tests the machine, loads its firmware and operating system, and boxes it. The brand on the lid designs the product, sells it and ships its updates.
That is the short answer. This guide is the long one. It follows every major part from raw material to finished component, then follows the finished laptop through the factory, onto a plane or a ship, into a buyer's hands and, eventually, into a recycling stream. It also covers what each stage costs, using the few bill of materials (BOM) estimates that reputable analysts have published, and it opens up the layer that physical teardowns skip: the firmware and software from a dozen vendors that runs inside every unit.
It is written for anyone who wants to understand how a laptop really comes together, and in particular for the people who build, buy or secure them: OEM and ODM engineers, firmware teams, IT and procurement leads who buy laptop fleets, and security teams who get asked, "what software is actually running on these machines?" Jargon is defined the first time it appears.
The chips get extra depth in a companion post on fabless chip designers and the software supply chain, which explains how chip designers work with foundries. For a shorter overview of materials and firmware, see how a laptop is made: materials, components and firmware.
Contents
- How is a laptop made? The short answer
- What parts are in a laptop?
- How each laptop part is made, from raw material to finished part
- Where are laptop parts made?
- What is an ODM, and who makes laptops for Dell, HP and Apple?
- How is a laptop assembled in the factory?
- Where are laptops made?
- How do laptops get from the factory to you?
- How much does it cost to make a laptop?
- How are desktop PCs built differently?
- Can you repair a laptop, and what happens at end of life?
- What firmware and software is inside a laptop?
- Where does supply chain risk enter a laptop?
- What should OEMs, ODMs and component makers do?
- How Safeguard helps hardware and firmware teams
- For partners in the hardware ecosystem
- The takeaway
- Frequently asked questions
- Sources
How is a laptop made? The short answer
A laptop is made by four layers of companies. Component makers produce the processor, memory, storage, screen, battery and smaller parts. An ODM or contract manufacturer builds the motherboard, assembles, tests and images the machine. The brand owner designs and sells it. Firmware and software vendors supply the code that runs on nearly every part.
Here is who does what, in plain terms.
The brand owner, also called the OEM (original equipment manufacturer), decides what the product is: the processor platform, screen, industrial design, price and the software image. Lenovo, HP, Dell, Apple, ASUS and Acer are brand owners. The brand owns the customer relationship, the warranty and the updates.
The ODM turns that brief into a product that can be built at scale. An ODM designs or co-designs the motherboard, sources most of the parts, runs the factories and ships finished units. The large notebook ODMs are Taiwanese groups: Compal and Inventec describe themselves as ODMs that make notebooks, Wistron mainly produces notebooks, and Quanta is a contract maker of notebooks. Foxconn (Hon Hai) also builds notebooks for Apple, according to DigiTimes.
Component makers sit below the ODM. Some are household names, such as Intel, Samsung or LG. Most are not, such as the Taiwanese firms that make battery packs, keyboards and fan modules.
Firmware and software vendors are the fourth layer. Their code runs on the processor, the embedded controller, the SSD, the Wi-Fi chip, the battery and more. This layer gets the most attention later in the guide, because it is the one that buyers see least.
Figure 1. The four layers of companies behind every laptop, and what flows between them.
What parts are in a laptop?
A laptop contains a system on a chip (the processor), memory, an SSD, a motherboard with power circuits, a display, a lithium-ion battery, a chassis, a keyboard and trackpad, a cooling system, a Wi-Fi module, a camera, microphones and speakers, ports, and an external charger. Each part also carries firmware.
Open a typical 14 inch business laptop from the bottom and the layout is familiar. A motherboard spans most of the base. The battery fills the front half, often under the trackpad. A fan and heat pipe assembly sits over the processor. An SSD sits in an M.2 slot or is soldered to the board. Speakers sit in the corners. The display assembly in the lid holds the panel, the webcam, microphones and the Wi-Fi antennas, and hinges join the two halves.
Figure 2. What is inside a laptop, layer by layer. Real designs vary.
The main parts, with a one-line job description each:
- System on a chip (SoC). The processor package. It combines CPU cores, an integrated GPU, a neural processing unit (NPU) for AI tasks, memory controllers and much of the input and output logic.
- Memory (RAM). Working memory, soldered to the board or on a removable module.
- Storage (SSD). A solid state drive made of NAND flash chips plus a controller.
- Motherboard. The printed circuit board that connects everything, plus power circuits, the embedded controller and a flash chip that holds the BIOS.
- Display. An LCD or OLED panel with its driver electronics.
- Battery. A lithium-ion pack with a battery management system (BMS).
- Chassis. The aluminium, magnesium or plastic shell.
- Keyboard and trackpad. Input devices with their own controllers.
- Thermal system. Heat pipes or a vapour chamber, fins and fans.
- Wireless module. Wi-Fi and Bluetooth, on a card or soldered down.
- Camera, microphones and speakers. Image sensor modules, MEMS microphones, small speaker drivers.
- Ports and connectors. USB-C, HDMI, audio, plus the hidden board-to-board and flex connectors.
- Charger. An external power adapter, now usually USB-C.
The rest of this guide takes each of those apart.
How each laptop part is made, from raw material to finished part
Every major laptop part follows its own chain of five to ten manufacturing steps, from a mined or refined raw material to a tested component. Each step is usually done by a different company, and often in a different country. The six chains below carry most of the value in the machine.
Figure 3. Raw material to finished part for the six biggest laptop supply chains.
How is a laptop processor made?
A laptop processor starts as quartz. The quartz is reduced to metallurgical silicon in an arc furnace, purified to polysilicon, grown into a single crystal ingot, sliced into wafers, patterned in a fab over roughly three months, then cut into dies, packaged and tested before it ships to the motherboard line.
Here is that chain step by step, with what is known about where each step happens.
Step 1: quartz to metallurgical silicon. Silicon of 96 to 99 percent purity is made by reducing quartzite or sand with very pure coke (a form of carbon) in an electric arc furnace, according to the Wikipedia article on silicon. Most silicon produced this way never goes near a chip. The same article notes that only about 20 percent of elemental silicon output is refined to metallurgical grade, and an estimated 15 percent of metallurgical grade silicon is refined further to semiconductor purity. The rest goes into steel and aluminium alloys.
Step 2: polysilicon. Metallurgical silicon is purified chemically in the Siemens process: it is converted into volatile silicon compounds, distilled, and decomposed back into silicon at high temperature. Polysilicon made for electronics has impurity levels below one part per billion, according to the polysilicon article. Most polysilicon by volume goes to solar panels. A much smaller group of producers makes electronic grade material.
Step 3: single crystal ingot. In the Czochralski method, a small seed crystal is dipped into molten polysilicon and slowly pulled and rotated, growing one large cylindrical single crystal called an ingot or boule. Roughly 90 percent of modern semiconductor devices use material derived from this method, according to the Czochralski method article.
Step 4: wafers. The ingot is ground to size, sliced with diamond wire, then lapped, etched and polished. Leading edge chips use 300 mm wafers about 775 microns thick, per the wafer article. Wafer makers include Shin-Etsu and SUMCO in Japan and GlobalWafers in Taiwan.
Step 5: the fab. The front end fab builds transistors and wiring on the wafer. The core loop is deposition (adding a thin film), lithography (printing a pattern with light through a mask), etching (removing material where the pattern says), ion implantation or doping (changing how the silicon conducts) and chemical mechanical polishing (flattening the surface). The loop repeats for dozens of layers and hundreds of individual steps. At advanced nodes, fabrication can take up to 15 weeks, with 11 to 13 weeks the industry average, according to the semiconductor fabrication article. Production in advanced fabs is fully automated.
Step 6: wafer sort. Every die on the finished wafer is probed electrically. Bad dies are mapped out.
Step 7: dicing and packaging. The wafer is cut into individual dies. Each good die is bonded to a package substrate, a small multilayer board that fans out the chip's tiny connections to the solder balls on the bottom. Modern laptop processors often put several dies, called tiles or chiplets, on one package.
Step 8: final test. Packaged chips are tested at speed and sorted (binned) into product grades. A chip whose cores run fastest may be sold as a higher model than one from the same wafer that runs slower.
Step 9: to the ODM. Chips ship on reels and trays to the motherboard surface mount line.
Who designs and who makes it. Many chip companies are fabless: they design the silicon and pay a foundry to make it. AMD, Nvidia, Qualcomm, Apple and MediaTek work this way, mostly with TSMC. Intel historically made its own chips, and it has also used TSMC for parts of recent laptop processors. On Meteor Lake, the compute tile is made on Intel 4 while the graphics tile is made on TSMC N5 and the SoC and I/O tiles on TSMC N6, according to the Meteor Lake article. Lunar Lake, launched in September 2024, was the first Intel design whose logic dies were all made on TSMC nodes, per the Lunar Lake article. Windows and Linux laptops mostly use Intel, AMD or Qualcomm processors, and Apple designs its own M series chips. The companion post covers the foundry relationship in depth.
Figure 4. Sand to silicon to chip, with the publicly sourced scale and cost pointers.
The cost picture. Processor costs are among the least public numbers in the industry. Two data points are reliable enough to use. An analyst estimate reported by Tom's Hardware puts a TSMC 3nm wafer at about US$18,000, more than three times the price of ten years earlier. And at the level of a finished laptop, TrendForce estimates that the CPU, DRAM and SSD together made up about 45 percent of the BOM of a US$900 mainstream notebook in the first quarter of 2025 (TrendForce, September 2026). Because TrendForce separately says DRAM and SSD are roughly 15 percent of a notebook BOM under normal conditions (as quoted by PC Gamer), the CPU alone works out to roughly 30 percent of that benchmark BOM. Treat that as a derived estimate, not a published figure. In Apple's case, TechInsights found the M3 processor alone accounts for 41 percent of the MacBook Air 13 inch BOM (TechInsights teardown). Either way, the processor is the single most expensive part in most laptops.
The software angle. A processor ships with code of its own: microcode that patches the CPU's behaviour, and a separate security processor running its own firmware. Intel's is the Converged Security and Management Engine (CSME), an autonomous subsystem built into virtually all Intel chipsets (Intel Management Engine article). AMD's is the Platform Security Processor, an Arm Cortex-A5 core with TrustZone inside the processor (AMD PSP article). Chip vendors also supply reference firmware modules that the BIOS vendor integrates.
How are RAM and SSD storage made?
RAM and SSD storage are made in dedicated memory fabs from the same kind of silicon wafers as processors. DRAM stores each bit as charge in a tiny capacitor. NAND flash stacks hundreds of layers of storage cells vertically. Dies are tested, stacked, packaged and mounted on modules or M.2 boards with a controller and firmware.
DRAM, step by step. DRAM (dynamic random access memory) stores each bit in a cell made of one transistor and one capacitor. The charge leaks, so every cell must be refreshed many times a second, which is where the word "dynamic" comes from (DRAM article). The manufacturing chain is:
- Wafers arrive from the wafer makers.
- The memory fab builds billions of transistor and capacitor cells in dense arrays. The industry race is to shrink cells while keeping the stored charge stable.
- Wafers are probed. Spare rows and columns replace defective ones.
- Dies are diced and packaged, often stacked several high in one package.
- Packages are tested at speed.
- For removable memory, a module maker mounts packages on a small board with a chip that tells the system what the memory is. For soldered LPDDR memory, packages go straight to the ODM's SMT line.
Laptops use soldered LPDDR, DDR on SO-DIMM modules, or newer CAMM style modules that combine serviceability with density. DRAM production is concentrated in three companies. In the third quarter of 2025, SK hynix, Samsung and Micron together held just over 90 percent of DRAM revenue (TrendForce data via Evertiq).
NAND flash, step by step. NAND flash stores bits as trapped charge in cells that keep their state without power. Modern 3D NAND stacks layers of cells vertically. In November 2024, SK hynix announced mass production of 321-layer NAND, the first above 300 layers. The chain mirrors DRAM: wafers, fab, probe, dice, stack and package, test.
The SSD. An SSD combines NAND packages, a controller and often a small DRAM cache on an M.2 card. Thin laptops use the short 2230 or 2242 sizes, larger ones 2280, and some solder flash straight onto the motherboard. The controller is a small processor running serious firmware: the flash translation layer (which maps the operating system's view of the disk onto physical flash pages), wear levelling, error correction, garbage collection, encryption and power loss protection.
Who supplies it. NAND comes mainly from Samsung, SK hynix and its subsidiary Solidigm (created when SK hynix bought Intel's NAND business, per the Solidigm article), Kioxia, Sandisk and Micron. Sandisk is Western Digital's former flash business: the split was completed on 24 February 2025, when Sandisk relisted on Nasdaq (Sandisk article). Controllers come from the flash makers or from independent designers such as Phison and Silicon Motion, and Marvell also sells SSD controllers.
The cost picture. Memory is the most volatile line in a laptop BOM. TrendForce says DRAM and SSD together are roughly 15 percent of a notebook's BOM in normal conditions, but after several quarters of sharp memory price rises it projected that share to exceed 30 percent in the first quarter of 2026 (PC Gamer, quoting TrendForce). By the third quarter of 2026, CPU, DRAM and SSD together reached 68 percent of TrendForce's benchmark notebook BOM, up from 45 percent (TrendForce).
The software angle. You trust the SSD controller's firmware with every byte on the machine. In 2019, researchers Carlo Meijer and Bernard van Gastel reverse engineered the firmware of several self-encrypting SSDs and found that, for many models, data could be fully recovered without the password. Because Windows BitLocker relied entirely on the drive's own encryption when a drive advertised it, BitLocker-protected data on those drives was exposed too. The authors estimated the affected drives covered roughly 60 percent of the market (Self-Encrypting Deception, IEEE S&P 2019).
How is a motherboard made?
A laptop motherboard is made in two stages. A PCB fabricator turns copper foil, glass fibre cloth and epoxy resin into a multilayer bare board by imaging, etching, pressing, drilling and plating. Then the ODM's surface mount line prints solder paste, places components, reflows the solder, and inspects and tests the finished board.
Stage one: the bare board. A laptop motherboard is a multilayer printed circuit board (PCB), a stack of many copper layers separated by insulating layers. Its raw materials are copper foil, woven glass fibre cloth and epoxy resin. The process, as described in the PCB manufacturing article, runs:
- Laminate. Glass cloth is soaked in epoxy and partly cured to make prepreg sheets, and pressed with copper foil to make copper clad laminate (the core).
- Inner layers. Each core is coated with photoresist, exposed to the circuit pattern and etched, leaving copper traces.
- Lamination. Cores and prepreg are stacked and pressed under heat and pressure into one board.
- Drilling. Holes are drilled to connect layers. High density laptop boards use laser drilled microvias, tiny holes that connect only adjacent layers.
- Plating. Holes are plated with copper so they conduct.
- Outer layers. The outside copper is patterned and etched.
- Solder mask and finish. A green or black solder resist covers everything except the pads, a surface finish protects the pads, and a legend is printed.
- Bare board test. Every board is electrically tested for opens and shorts.
The advanced substrate under the processor itself is a separate, finer product made by specialist substrate makers.
Stage two: surface mount assembly (SMT). The ODM populates the bare board on its own SMT lines, described in the surface-mount technology article:
- Solder paste printing. A steel stencil prints paste onto the pads.
- Solder paste inspection (SPI). 3D cameras check the volume and position of the paste.
- Pick and place. High speed machines set components, from passives smaller than a grain of sand to the processor package.
- Reflow. A conveyor oven melts the paste into solder joints.
- Automated optical inspection (AOI). Cameras check placement and joints.
- X-ray inspection. Checks joints hidden under ball grid array (BGA) packages such as the SoC.
- In-circuit and functional test. Probes and boot tests confirm the board works before final assembly.
Figure 5. The bare board and the surface mount line that populates it.
Power delivery and passives. A laptop processor needs low voltages at high currents, with demand changing thousands of times a second. Voltage regulators, built as multiphase buck converters from a controller, power stages (MOSFETs), inductors and banks of capacitors, step battery or adapter voltage down for each rail. Many of those capacitors are multilayer ceramic capacitors (MLCCs), made by stacking hundreds of thin ceramic and electrode layers and firing them. A laptop board carries hundreds of them. Murata and TDK are leading MLCC makers, alongside Samsung Electro-Mechanics and Taiyo Yuden.
Who supplies it. TrendForce estimated in 2023 that mainland China produced 53 percent of the world's PCBs, Taiwan 13 percent, Korea 10 percent, Japan 9 percent and Southeast Asia 8 percent (TrendForce). SMT is usually done by the ODM.
The cost picture. No reputable public source gives a current share of BOM for the bare PCB and passives in a mainstream laptop. In TechInsights' MacBook Air figures, the board and all other electronics sit inside the 31 percent not taken by the processor, display and mechanical parts.
The software angle. The motherboard carries two chips that matter most for firmware: a SPI flash chip holding the UEFI firmware, and the embedded controller. Both are covered in the firmware section below.
How is a laptop screen made?
A laptop screen is made on very large sheets of thin glass. Panel makers build a grid of thin film transistors on the glass, then either sandwich liquid crystal against a colour filter (LCD) or evaporate organic light-emitting layers onto it in a vacuum (OLED). The sheet is cut into panels, and driver chips, polarisers and, for LCDs, a backlight are added.
Most laptops use an IPS type LCD with an LED backlight. Premium models increasingly use OLED. The step by step chain:
- Glass. Specialist glass makers produce extremely flat, thin display glass in large sheets called mother glass.
- TFT backplane. In a cleanroom, the panel maker deposits and patterns a thin film transistor (TFT) array on the glass, one transistor per sub-pixel, using processes related to chip making but at much larger feature sizes. The transistor material is amorphous silicon, metal oxide or low temperature polysilicon (LTPS).
- LCD cell. For an LCD, a second glass sheet carries the red, green and blue colour filter. The two sheets are aligned, liquid crystal a few microns thick goes between them, and the edges are sealed.
- OLED deposition. For an OLED, organic emitting layers are deposited onto the backplane, usually by thermal evaporation in a vacuum through fine metal masks, then sealed with thin film encapsulation against moisture and oxygen, as described in the OLED article.
- Cutting. The mother glass is cut into individual panels.
- Module assembly. Polarisers, driver chips and a timing controller (TCON) board are attached. LCD modules also get a backlight: LEDs along one edge, a light guide plate that spreads the light, and optical films.
- Test. Every module is lit and inspected before it ships to the ODM.
Figure 6. LCD filters a backlight; OLED emits light in every pixel.
Who supplies it. A small group of large panel makers dominates: AUO, BOE, Innolux, LG Display, Samsung Display, Sharp, TCL CSOT and Tianma among them (list of flat panel display manufacturers). Samsung Display makes OLED panels for laptops among other products. Panel fabs sit mainly in mainland China, South Korea, Taiwan and Japan.
The cost picture. The display is usually the second most expensive part after the processor. In the MacBook Air 13 inch teardown, TechInsights put the display at 18 percent of the BOM (TechInsights). We found no reputable public figure for the panel share of a mainstream Windows notebook.
The software angle. The TCON and the panel's driver chips run firmware, and some displays negotiate refresh rate and power features with the system firmware and graphics driver.
How are laptop batteries made?
Laptop batteries are made in three stages. Miners and refiners produce lithium, cobalt, nickel and graphite chemicals. Cell makers coat electrodes, wind or stack them with a separator, fill them with electrolyte and run controlled first charges called formation. Pack makers then match cells, connect them and add a battery management board with firmware.
Stage one: materials. A lithium-ion cell needs a cathode material, an anode material, metal foils, a porous separator and an electrolyte (a lithium salt dissolved in solvent). Consumer cells commonly use a lithium cobalt oxide cathode and a graphite anode. The raw materials come from a short list of countries. The Democratic Republic of the Congo supplied 76 percent of mined cobalt in 2024, according to the Cobalt Institute's July 2025 factsheet. Refining is even more concentrated. The International Energy Agency (IEA) reports that China is the dominant refiner for 19 of the 20 energy-related minerals it analyses, with an average share of around 70 percent, and that between 2020 and 2024 China supplied most of the growth in refined cobalt and graphite (IEA Global Critical Minerals Outlook 2025).
Stage two: the cell. The cell manufacturing process, as laid out by Battery Design, runs:
- Mixing. Active material, conductive additive and binder are mixed into a slurry.
- Coating. The slurry is coated onto foil (aluminium for the cathode, copper for the anode), roll to roll.
- Drying. Solvent is driven off in long ovens and recovered.
- Calendering. Rollers press the electrode to a controlled thickness and porosity.
- Slitting and notching. Electrode rolls are cut into strips and tabs are formed.
- Winding or stacking. Cathode, separator and anode are wound into a jelly roll or stacked in layers. Pouch cells, common in laptops, are usually stacked.
- Enclosure. The stack goes into a pouch or can.
- Electrolyte filling. Done in dry rooms with a very low dew point, because moisture decomposes the electrolyte (lithium-ion battery article).
- Formation and sealing. The cell is charged for the first time under control. A protective layer called the solid electrolyte interphase (SEI) forms on the anode, gases are released, and the cell is sealed.
- Ageing and grading. Cells rest while their voltage is monitored. Formation plus ageing can take up to three weeks. Cells are then sorted by capacity and internal resistance.
Stage three: the pack. The pack maker matches cells with similar behaviour, welds or connects them in series, adds a battery management system (BMS) board with a fuel gauge, protection circuits and often an authentication chip, wraps the pack and runs charge and safety tests.
Figure 7. From mine to battery pack, in three stages.
Who supplies it. Cell makers whose cells go into laptops include ATL (Amperex Technology), LG Energy Solution and Sunwoda. Packs are often built by specialist assemblers. Taiwan's Simplo and Dynapack have long been the two leading notebook battery module makers (CENS, 2005).
The cost picture. BloombergNEF's December 2025 survey put the average lithium-ion pack price at a record low of US$108 per kilowatt hour, down 8 percent from 2024 (BloombergNEF). That average is dominated by electric vehicle and storage packs, which use different chemistries and enormous volumes. As a rough sense of scale only: a 55 watt hour laptop battery holds 0.055 kilowatt hours, which at that average would be about six dollars of pack. Real laptop packs cost more per kilowatt hour, because they use smaller, denser cells, custom shapes and their own electronics, but we found no reputable public figure for laptop pack prices.
The software angle. The fuel gauge runs firmware that tracks charge, health and safety limits, and many packs authenticate themselves to the laptop so the system can refuse a counterfeit.
How is a laptop chassis made?
A premium laptop chassis is usually CNC machined from aluminium alloy, which starts as bauxite ore, is refined into alumina and smelted into aluminium. Lighter business machines often use die cast magnesium alloy. Budget laptops use injection moulded plastic. The shell is then finished by blasting, anodising or painting.
The aluminium chain:
- Bauxite. The main aluminium ore is mined.
- Alumina. The Bayer process dissolves the aluminium compounds in bauxite in hot sodium hydroxide and precipitates aluminium oxide (alumina), as described in the Bayer process article.
- Aluminium. The Hall-Heroult process dissolves alumina in molten cryolite and splits it by electrolysis in large cells (Hall-Heroult process article). This step uses a great deal of electricity.
- Alloy. Aluminium is alloyed and cast or rolled into billets and sheets.
- Forming. For a premium chassis, a blank is CNC machined, often from a single block, into the top case or bottom cover. Cheaper metal shells can be stamped.
- Finishing. The part is bead blasted for texture and anodised: an electrochemical process grows a hard oxide layer on the surface, which can be dyed for colour (anodizing article).
Magnesium alloy is lighter than aluminium for the same stiffness and common in light business laptops. It is die cast or thixomolded (injected as a semi-solid) and then painted. Plastics such as polycarbonate and ABS blends are injection moulded in steel moulds. Recycled aluminium and plastics are increasingly common across all three.
Who supplies it. Catcher Technology makes shells for PC notebooks using magnesium alloy die castings and aluminium alloys. BYD Electronics makes structural parts in metal, glass, ceramics and plastics and has worked on high-end notebooks with Intel for over ten years. Plastic parts usually come from mould makers near the assembly sites, mostly in mainland China and increasingly Vietnam.
The cost picture. TechInsights found the aluminium housing and keyboard of the MacBook Air 13 inch together represent 10 percent of the total hardware cost, roughly six dollars more than the average laptop it has analysed (TechInsights).
How are the keyboard and trackpad made?
A laptop keyboard is a module of moulded keycaps, scissor mechanisms, rubber domes, a printed membrane circuit, a backlight film and a metal support plate, assembled and tested key by key. A trackpad is a capacitive sensor board with a touch controller under a glass or Mylar surface.
The keyboard chain: keycaps are injection moulded and printed or laser etched; scissor mechanisms hold each key level; a rubber dome gives the key its feel and pushes it back up; under the domes, a membrane of three layers (two printed circuit layers and a spacer) closes a contact when a key is pressed (keyboard technology article). A light guide film and LEDs provide backlighting. The module is tested key by key. In some laptops the keyboard is part of the top case assembly, which iFixit flags as a repair drawback.
The trackpad is a printed sensor grid read by a touch controller, under a glass or plastic top surface, sometimes with a haptic actuator instead of a mechanical click. Windows laptops follow Microsoft's Precision Touchpad specification.
Who supplies it. Sunrex is described by DigiTimes as a major notebook keyboard maker, and Chicony makes keyboards and camera modules (DigiTimes keyboard coverage). Synaptics makes touchpads and touch controllers for laptops. The keyboard matrix itself is usually scanned by the embedded controller, so its behaviour depends on EC firmware.
How does a laptop cooling system work, and how is it made?
A laptop cools itself with heat pipes or a vapour chamber that carry heat from the processor to fin stacks, where small fans blow it out of the chassis. A heat pipe is a sealed copper tube with a wick and a little water inside: the water boils at the hot end, the vapour flows to the cool end, condenses and wicks back.
Modern CPU heat pipes are typically made of copper with water as the working fluid (heat pipe article). The manufacturing chain:
- Tube. A copper tube is cut to length.
- Wick. A wick is formed inside, usually sintered copper powder, a mesh or fine grooves.
- Evacuate and charge. Air is pumped out and a small measured amount of water is added. At the low internal pressure, water boils at a low temperature.
- Seal and shape. The tube is sealed, flattened and bent to fit the chassis.
- Assemble. Heat pipes are soldered to a copper cold plate that sits on the processor and to aluminium or copper fin stacks at the vents.
- Fans. Small centrifugal blowers with brushless motors push air through the fins.
A vapour chamber is the same idea flattened into a plate, used in thin, powerful machines.
Who supplies it. DigiTimes names Auras, Forcecon and Asia Vital Components (AVC) as notebook cooling module makers (DigiTimes cooling module coverage, DigiTimes on Auras), and Delta Electronics is known for computer fans.
The software angle. Fan curves and power limits are policy written in firmware, usually in the embedded controller and the BIOS. A bug there shows up as throttling, noise or overheating.
How are the webcam, microphones and speakers made?
A laptop webcam is an image sensor chip packaged with a precisely aligned lens stack on a small board. Microphones are MEMS devices, tiny silicon diaphragms etched on a chip. Speakers are small drivers with a voice coil and magnet in a sealed box.
- Camera module. The image sensor is made in a semiconductor fab, then packaged with a precisely aligned lens stack. Many business laptops add an infrared sensor and emitter for face sign in. Image sensors come from firms such as Sony, OmniVision (whose sensors are used in phones, laptops and webcams) and Samsung. Camera modules are built by firms such as Sunny Optical, LG Innotek and Chicony. TechInsights put the MacBook Air camera subsystem at slightly over five dollars.
- Microphones. MEMS (micro electro mechanical systems) microphones are micromachined silicon diaphragms packaged with an amplifier, used in phones, headsets and laptops (MEMS article). Laptops often use more than one, as an array, for noise reduction.
- Speakers. A voice coil attached to a small diaphragm moves in the field of a neodymium magnet. Laptop speakers are sealed modules with tuned enclosures.
The software angle. Image processing, face sign in, amplifier tuning and microphone noise suppression all depend on firmware and drivers, and the camera's firmware decides what the privacy light does.
How are Wi-Fi and Bluetooth modules made?
A laptop Wi-Fi and Bluetooth module is a mixed signal radio chip, made in a semiconductor fab, mounted with front end parts on a small M.2 card or soldered to the motherboard. Antennas are separate parts in the lid, tuned for each design, and every module needs radio certification in each market.
The radio chip combines digital logic with sensitive analogue radio circuits. On the module, it sits beside front end components such as filters and amplifiers. The finished design is certified for radio emissions in each market where the laptop is sold.
Who supplies it. Wi-Fi chips in Windows laptops come from vendors such as Intel, MediaTek, Qualcomm and Realtek. Broadcom has long supplied Apple's Wi-Fi and Bluetooth chips, and in December 2024 reports said Apple would begin replacing those with its own combined chip from 2025 (MacRumors, citing Bloomberg). TechInsights valued the MacBook Air's Wi-Fi and Bluetooth package at US$12.25.
The software angle. Wireless chips are heavy firmware users. The radio runs its own firmware, usually loaded by the driver at boot, plus Bluetooth patches and regulatory data. On Linux these files are distributed through the linux-firmware repository. In 2017, Exodus Intelligence researcher Nitay Artenstein showed with Broadpwn that a bug in Broadcom's Wi-Fi chip firmware could be used to compromise phones remotely, before the operating system saw a single packet.
How are laptop ports and connectors made?
Laptop connectors are stamped from copper alloy, plated with nickel and gold on the contacts, and moulded into plastic housings. Behind each USB-C port sits a small stack of chips: a USB Power Delivery controller, signal retimers and often a Thunderbolt or USB4 controller, each with its own firmware.
Flexible printed circuits, thin copper on polyimide film, link the motherboard to daughter boards, the display and the keyboard. Thunderbolt controllers were separate chips for years. Intel began integrating Thunderbolt 4 into mobile processors with Tiger Lake in late 2020 (Thunderbolt article). A physical port therefore has a small software attack surface of its own: the PD controller negotiates with anything you plug in.
How is a laptop charger made?
A laptop charger is a compact switch mode power supply. It rectifies mains AC, switches it at high frequency through a small transformer, rectifies it again to DC and uses a Power Delivery controller to agree a voltage with the laptop over USB-C. Gallium nitride (GaN) switches allow higher frequencies and smaller chargers.
Inside: an input filter and rectifier, a primary controller and power switch, a transformer for isolation, synchronous rectification on the output, and a USB PD controller that talks to the laptop. GaN transistors are suited to high frequency, high efficiency power conversion, which lets designers shrink the transformer and the whole charger; the gallium nitride article notes that integrated GaN power ICs reduce the size and component count of mobile and laptop chargers. Every design passes safety and electromagnetic compatibility testing.
Who supplies it. Salcomp makes adapters and chargers for phones, tablets and notebooks, and Delta produces notebook power adapters by the millions each year. Even the charger's PD controller runs firmware.
Where are laptop parts made?
Most laptop parts are made in East Asia. Processors are mostly fabricated in Taiwan, memory in South Korea and nearby, panels in mainland China, South Korea, Taiwan and Japan, and batteries, chassis, keyboards and thermal parts mainly in mainland China, Taiwan and Southeast Asia. Raw materials come from a wider set of countries.
Figure 8. Component, makers and regions. Example makers are illustrative, not complete.
Some concentration figures are well sourced:
- DRAM. In the third quarter of 2025, SK hynix held 33.2 percent of DRAM revenue, Samsung 32.6 percent and Micron 25.7 percent, together just over 90 percent (TrendForce data via Evertiq).
- PCBs. TrendForce estimated in 2023 that mainland China produced 53 percent of the world's printed circuit boards, followed by Taiwan at 13 percent, Korea at 10 percent, Japan at 9 percent and Southeast Asia at 8 percent (TrendForce, May 2023).
- Cobalt. 76 percent was mined in the DRC in 2024 (Cobalt Institute).
- Mineral refining. China is the dominant refiner for 19 of 20 energy minerals the IEA tracks (IEA).
The raw materials inside a laptop
- Silicon. From quartz, refined to ultra pure polysilicon and grown into wafers.
- Copper. PCB traces, chip wiring, heat pipes, cables, inductor windings and connectors.
- Aluminium and magnesium. Chassis metals, plus aluminium in fin stacks, battery cathode foil and capacitors.
- Rare earth elements. Neodymium iron boron magnets in speakers, fan motors and haptic actuators.
- Lithium, cobalt, nickel and graphite. The battery.
- Tin. The main ingredient in lead-free solder, usually a tin, silver and copper alloy.
- Gold, tantalum, indium and glass. Gold plating on contacts, tantalum in some capacitors, indium in the transparent conductive layer of displays, and glass for panels and trackpads.
Each has its own mining, refining and recycling chain.
What is an ODM, and who makes laptops for Dell, HP and Apple?
An ODM (original design manufacturer) is a company that designs and builds products that another company sells under its own brand. Most laptops from Dell, HP, Apple, ASUS and Acer are built by Taiwanese ODMs and contract manufacturers such as Quanta, Compal, Wistron, Inventec and Foxconn, in their factories in Asia and elsewhere.
There are three common models, and most large brands mix all three.
The ODM model. The brand writes a specification. The ODM designs much of the product, often the motherboard and mechanical layout, sources most parts on the brand's behalf and builds it. The brand keeps control of industrial design, key parts, firmware and the software image. Most mainstream Windows notebooks are built this way.
The contract or EMS model. In electronics manufacturing services (EMS), the brand designs the product and the contract manufacturer builds it to that design. Foxconn (Hon Hai) and Pegatron are large contract manufacturers that build computing products. In practice the line between ODM and EMS blurs.
The in-house model. The brand runs its own factories. Lenovo is the best known example in PCs. It operates manufacturing facilities in Chengdu and Hefei in China and in Japan, and after a 2009 review of costs and benefits it decided to make at least half of its manufacturing in-house (Lenovo article). Lenovo is also the world's largest PC maker, with a record 25.6 percent share in its fiscal second quarter of 2025/26 (Lenovo results).
Who builds for whom. Brand and ODM pairings shift with every product generation and are rarely confirmed by the companies. Trade press gives a fair picture. DigiTimes reported in 2023 that Dell mainly outsources its manufacturing to Compal and Wistron, and Apple to Foxconn and Quanta (DigiTimes). TrendForce reported in 2025 that HP had worked with Quanta and Inventec to set up new production lines in Thailand (TrendForce).
Why ODMs exist. Building laptops is a high volume, low margin business. Compal, one of the largest notebook ODMs, reported a gross margin of 5.6 percent and an operating margin of 1.4 percent for 2025 (Quartr summary of Compal's Q4 2025 results). Its 5.2 percent gross margin in the first quarter of 2025 was its best in nearly 15 years (Taipei Times). ODMs win on scale, purchasing power and process discipline, and spread their factories across many brands.
How is a laptop assembled in the factory?
A laptop is assembled on an ODM line in about nine stages: parts are kitted for each order, the tested motherboard and cooling module go into the chassis, the battery, storage and other modules follow, the display is attached, the case is closed, then each unit is tested under load, has its firmware provisioned and its operating system imaged, and is packed.
By the time parts reach the final assembly line, the motherboard has already passed SMT and board test.
- Kitting. Parts for each order are pulled and matched: memory, SSD, panel, keyboard language, battery.
- Base assembly. The motherboard goes into the chassis, with thermal compound and the heat pipe module over the processor.
- Subassemblies. Battery, speakers, SSD, wireless card and daughter boards are installed and connected with flex cables.
- Display and hinge. The tested display assembly joins the base, and antenna and display cables are routed through the hinge.
- Closing. The bottom cover goes on with torque controlled screwdrivers, and labels are applied.
- Functional test and burn-in. Each unit boots a diagnostic environment and tests processor, memory, storage, display, keyboard, ports, audio, camera and wireless, often under sustained load to catch early failures.
- Firmware provisioning. BIOS, embedded controller and other firmware are flashed or verified. System identity such as the serial number is written, and security settings such as Secure Boot keys are set.
- Imaging. The operating system image goes on with drivers and the OEM's software. For Windows, OEMs use Microsoft's manufacturing tools, such as the Windows Assessment and Deployment Kit, Windows PE and DISM (Microsoft desktop manufacturing documentation).
- Final check and packing. Units are inspected, boxed with the charger, cartoned and palletised.
Steps 7 and 8 are where the software supply chain physically enters the hardware. Whatever keys, firmware versions and preinstalled software are written here are what the customer receives.
Figure 9. The final assembly line, and the logistics chain that follows it.
Where are laptops made?
Most laptops are assembled in mainland China. TrendForce estimates that about 24 percent of global notebook production happened outside China in 2025, falling to about 21 percent in 2026. Vietnam and Thailand are the largest alternatives, with smaller volumes in Mexico, India, Indonesia and Brazil.
TrendForce forecast in 2025 that Vietnam's share of global notebook production would reach 13.5 percent in 2025 and Thailand's 6.7 percent. Dell and Apple invested heavily in Vietnam, and Compal, Wistron, LCFC and Huaqin prioritised Vietnam for expansion. HP led in Thailand with Quanta and Inventec. Localised capacity in India, Indonesia and Brazil was estimated at 3.7 percent (TrendForce, September 2025). DigiTimes reported in 2023 that HP's new production sites were mainly in Mexico, with Thailand its Southeast Asian choice (DigiTimes).
The trend is not one way. In October 2026, TrendForce reported, citing Nikkei, that HP, ASUS and Acer were moving part of their production from Thailand and Vietnam back to China as memory and storage costs rose, and estimated that the share of notebook production outside China would decline from about 24 percent in 2025 to 21 percent in 2026, possibly below 20 percent in 2027 (TrendForce, October 2026).
Wherever final assembly happens, the component base still sits largely in East Asia, so a laptop assembled anywhere carries parts from many countries.
How do laptops get from the factory to you?
Finished laptops leave the factory on pallets and travel by air or sea freight to regional distribution hubs. From there they go to distributors, resellers, retailers or directly to business customers, where IT teams often re-image or enrol them before use.
The logistics chain has four legs:
- Freight. Laptops are light and valuable, so many fly. Air Cargo News, citing consultancy Aevean, reported that around 2,500 tonnes of laptops were flown out of Vietnam in February 2025, and that the April volume was 4,400 tonnes higher (Air Cargo News, June 2025). Others move by sea in containers.
- Regional hubs. Brands and their logistics partners hold stock close to demand. Some brands do configure to order work at these hubs, adding memory, storage or regional software.
- Distribution. Distributors and resellers serve businesses and smaller retailers, and large retailers and online stores sell to consumers.
- Deployment. Business fleets are often re-imaged or enrolled in device management on arrival, which adds the buyer's own software layer on top of the OEM's.
From a security view, each leg is another handoff. The laptop's firmware was fixed at the factory, but drivers, utilities and the operating system keep updating from the day it is first switched on.
How much does it cost to make a laptop?
There is no single answer, but published estimates show the pattern. In TrendForce's benchmark US$900 mainstream notebook, the CPU, DRAM and SSD made up about 45 percent of the bill of materials in early 2025 and 68 percent by late 2026. In TechInsights' MacBook Air M3 teardown, the processor was 41 percent and the display 18 percent.
A bill of materials (BOM) is the total cost of the parts in a product. It excludes assembly, testing, logistics, software, warranty, marketing, the brand's margin and the retailer's margin. Here is what reputable public sources actually say.
Published BOM estimates (all are estimates):
| Item | Figure | Source |
|---|---|---|
| CPU, DRAM and SSD share of a US$900 mainstream notebook BOM, 1Q 2025 | about 45% | TrendForce, Sep 2026 |
| Same share, 3Q 2026, after memory and CPU price rises | 68% | TrendForce, Sep 2026 |
| DRAM and SSD share of a notebook BOM, normal conditions | roughly 15% | TrendForce, quoted by PC Gamer |
| CPU share of the same benchmark, derived | roughly 30% | Derived: 45% minus 15% |
| Apple M3 processor share, MacBook Air 13 inch | 41% | TechInsights |
| Display share, MacBook Air 13 inch | 18% | TechInsights |
| Aluminium housing and keyboard, MacBook Air 13 inch | 10% | TechInsights |
| Wi-Fi and Bluetooth package, MacBook Air 13 inch | US$12.25 | TechInsights |
| MacBook Air 13 inch BOM versus 2023 MacBook Pro BOM | about 43% | TechInsights |
Figure 10. Where the BOM money goes, from two published analyses. Estimates; not like for like.
Three things stand out. First, a handful of chips dominate the cost: processor plus memory and storage is roughly half of a mainstream BOM in normal times and two thirds when memory prices spike. Second, the screen is usually next. Third, the mechanical parts, battery, board and everything else share what is left. Note that Apple's M3 package includes its unified memory, so the 41 percent is not directly comparable to an Intel or AMD CPU line.
Where is the money made? No reputable public source publishes a full raw-material-to-retail waterfall for a laptop, and we did not build one from guesses. What can be sourced are anchor points along the chain:
- Raw materials. BloombergNEF's average lithium-ion pack price was US$108 per kilowatt hour in 2025, for EV and storage packs (BNEF). Raw materials are a small share of a laptop's final value.
- Components. A leading edge 3nm wafer is about US$18,000 by analyst estimate (Tom's Hardware), and processor plus memory are the biggest BOM lines. Most of the value in the hardware is added here, in design and fabrication.
- Assembly. Compal's 2025 gross margin of 5.6 percent and operating margin of 1.4 percent show how little of the final price the ODM keeps (Quartr).
- Brand. HP's Personal Systems segment, its PC business, reported a 5.8 percent operating margin in its fiscal fourth quarter of 2025 on US$10.4 billion of revenue (HP results). Lenovo's group gross margin was 15.4 percent in its fiscal second quarter of 2025/26 (Lenovo results), though that figure covers servers, phones and services too.
- Channel and retail. We found no reputable public figure for distributor and retailer margins on laptops.
Figure 11. Sourced anchor points along the value chain. Margins are percentages of each company's own revenue and cannot be stacked.
The honest reading: a laptop is a product where component makers capture much of the hardware value, assembly runs on thin margins, and brands earn single digit operating margins on PCs. Software, services and accessories matter to brand profits, which helps explain why OEMs preinstall their own utilities.
How are desktop PCs built differently?
Prebuilt desktops from Dell, HP, Lenovo, Acer and ASUS are made like laptops, by an ODM or the brand's own factory. DIY and system integrator desktops are different: the buyer or integrator picks each part from a different brand, so no single company owns the machine's firmware or updates.
Prebuilt desktops follow the laptop pattern: ODM or in-house build, factory test, firmware provisioning and imaging.
DIY and integrator builds combine:
- A motherboard from a brand such as ASUS, MSI, Gigabyte or ASRock. Some build their own boards: Gigabyte designs and manufactures motherboards for AMD and Intel platforms. Others are tied to contract manufacturers: ASRock is owned by Pegatron. The motherboard brand ships the UEFI firmware, usually built on an IBV codebase.
- A processor from Intel or AMD.
- A graphics card from an add-in board partner, built around an Nvidia, AMD or Intel GPU, with its own video BIOS.
- Memory and storage from module brands.
- A power supply. Many PSU brands do not build their own units. Hardware Busters' analysis of public data found that CWT (Channel Well Technology) is the largest PSU OEM, with its units sold under 30 brand names, followed in its data by Seasonic, Sirfa (High Power), FSP, Super Flower, HEC and Great Wall (Hardware Busters).
- A case and cooling from case and fan brands.
The consequence for security: in a DIY desktop, the motherboard vendor ships the BIOS, the graphics card maker the vBIOS, the SSD maker its firmware, and each has its own update tool. Some of those update tools have themselves been the problem, as the Gigabyte case below shows.
Can you repair a laptop, and what happens at end of life?
Many laptops can be repaired, but repairability varies widely. iFixit scores laptops from zero (unrepairable) to ten (easiest to repair), and modular designs with standard storage and memory score best. At end of life, most electronic waste is still not formally recycled: only 22.3 percent was documented as properly collected and recycled in 2022.
Repairability. iFixit's engineers tear down new laptops and score them on how easily they can be taken apart and fixed with available parts and instructions (iFixit laptop repairability scores). The common themes in its recent scorecards:
- Soldered parts lower scores. Soldered memory and storage cannot be upgraded or swapped. iFixit notes, for example, that storage is soldered on the MacBook Air 13 inch M4.
- Modular designs score highest. iFixit praises the Framework Laptop 12's highly modular design, which makes nearly all common repairs very easy, and several recent ThinkPads for replaceable storage, memory, battery, display, keyboard and fan.
- Manuals and parts matter. Brands that publish service manuals and sell parts, as iFixit notes for Lenovo and Apple, make repair practical.
Lifecycle. A laptop in an enterprise fleet typically gets new firmware, drivers and OS releases for years after it leaves the factory, and the firmware supply chain described below stays live for its whole life. When it is retired, it may be refurbished and resold, harvested for parts, or recycled.
E-waste. The UN's fourth Global E-waste Monitor found that a record 62 million tonnes of e-waste was generated in 2022, up 82 percent from 2010 and on track to reach 82 million tonnes in 2030. Less than a quarter, 22.3 percent, was documented as properly collected and recycled, leaving about US$62 billion of recoverable resources unaccounted for (UNITAR, Global E-waste Monitor 2024). Recycling recovers copper, aluminium, gold, cobalt and other materials, closing part of the loop that started at the mine.
Data at end of life. Before a laptop is resold or recycled, its SSD must be securely erased. That brings the SSD's firmware back into play: secure erase and cryptographic erase are firmware features, and they are only as trustworthy as the controller code that implements them.
What firmware and software is inside a laptop?
A laptop runs code from many vendors on many processors: UEFI system firmware, processor microcode and security processor firmware, embedded controller firmware, SSD controller firmware, Wi-Fi and Bluetooth firmware, TPM firmware, GPU video BIOS, USB-C controller firmware, touchpad, camera and battery firmware, then the operating system, drivers and OEM utilities on top.
Here is what a physical teardown misses. Between pressing the power button and seeing the sign in screen, code from many companies runs on many small computers inside the laptop. Most of it is closed source, most of it is built partly from open source and third party components, and most buyers never receive an inventory of it.
Figure 12. What firmware is inside a laptop, layer by layer, and who supplies it.
What is UEFI firmware?
UEFI firmware is the first code that runs when a laptop powers on. It initialises the processor, memory and devices, enforces Secure Boot so only signed boot loaders run, and hands control to the operating system. It replaced the older BIOS, though people still call it the BIOS.
Where it comes from. Most Windows laptop firmware starts from a codebase supplied by an independent BIOS vendor (IBV), chiefly AMI, Insyde and Phoenix, the three vendors named in the LogoFAIL disclosures (The Hacker News). Those codebases build on the open source TianoCore EDK II project and incorporate reference code and binary modules from Intel or AMD. The ODM or OEM then customises the result for each board. Chromebooks and some open hardware use coreboot instead.
One BIOS image can therefore hold code from the IBV, the chip vendor, the OEM, the ODM, EDK II and a long tail of open source libraries for compression, cryptography, image decoding and networking. The image lives in a SPI flash chip on the motherboard and is updated through signed capsule updates, the OEM's update tool or the operating system's update service.
Secure Boot in one paragraph. Secure Boot uses a chain of keys stored in firmware. The Platform Key (PK) is the root, owned by the device maker. It signs the Key Exchange Key database (KEK), which in turn controls the allowed (db) and revoked (dbx) signature lists. Boot loaders signed by a key in db run; anything else does not. If the private half of the Platform Key leaks, the whole chain can be rewritten. That is exactly what PKfail was about.
Embedded controller firmware
The embedded controller (EC) is a small microcontroller that stays powered whenever the battery is connected. It runs the keyboard matrix, power button, lid switch, charging, fans, LEDs and thermal sensors. EC chips come from vendors such as ITE, a leader in keyboard and embedded controller technology, and Nuvoton, which makes notebook keyboard and embedded controllers. The firmware is usually written by the ODM or OEM from vendor reference code. ChromeOS devices use an open source EC codebase from the Chromium project. The EC rarely appears in vulnerability management, yet its firmware ships in every unit.
SSD controller firmware
It manages every write, enforces encryption on self-encrypting drives and is updated through vendor tools or OEM packages. The Self-Encrypting Deception research is the best known public example of how its design choices affect security.
Wi-Fi and Bluetooth firmware
Loaded by the driver at boot on most chips, shipped in driver packages on Windows and through linux-firmware on Linux. It parses radio traffic from anyone in range, as Broadpwn showed.
GPU video BIOS and drivers
A discrete GPU has its own video BIOS (vBIOS), while integrated graphics initialisation lives in the system firmware. GPU drivers are among the largest software components on a Windows PC, run partly in kernel mode, and are updated frequently.
TPM and security processor firmware
The Trusted Platform Module (TPM) stores keys and measurements for disk encryption and attestation. It is either a discrete chip or a firmware TPM inside the processor, and some newer platforms add Microsoft Pluton, a chip-to-cloud security processor. Even the root of trust runs updatable code. In 2017, researchers at Masaryk University disclosed ROCA (Return of Coppersmith's Attack), a flaw in RSA key generation in Infineon's TPM library that let an attacker compute a private key from the public key for commonly used key lengths. Fujitsu, Google, HP, Lenovo and Microsoft warned customers and issued updates (Security Affairs).
The OS image, preinstalled software and updaters
The factory image carries the operating system, drivers for every component above and the OEM's utilities for support, updates, audio, power and device management. Every one of those is a software product with its own dependencies. An OEM support tool may carry a web runtime and dozens of open source packages. A Wi-Fi driver package carries firmware files, regulatory data and installer code. A laptop does not ship one software supply chain. It ships several, nested, and the buyer usually sees none of them.
Where does supply chain risk enter a laptop?
Supply chain risk enters a laptop wherever code passes from one company to another: chip vendor reference code, BIOS vendor codebases, component firmware, OEM signing keys, factory provisioning, update tools and preinstalled software. Public incidents show that one flaw at any of those handoffs can reach products from many brands at once.
Figure 13. Each handoff in the chain, with a public incident that crossed brands or fleets.
The incidents below are industry patterns, not one company's problem. Every major PC maker ships privileged software and every one has published fixes for it.
Shared components: LogoFAIL (2023)
In late 2023, Binarly disclosed LogoFAIL, a set of vulnerabilities in the image parsers that UEFI firmware uses to display a boot logo. The parsers came from IBV reference code, so firmware from AMI, Insyde and Phoenix, and devices from brands including Intel, Acer and Lenovo, were affected at once. Full details were presented at Black Hat Europe in December 2023 (The Hacker News). The lesson: a library bug in one IBV codebase is a vulnerability in hundreds of laptop models.
Test keys in production: PKfail (2024)
In July 2024, Binarly reported PKfail. Many devices shipped with a Secure Boot Platform Key generated by AMI as a test key, marked "DO NOT TRUST", which device makers were expected to replace. The private key had leaked. BleepingComputer counted 813 affected products from Binarly's list across ten vendors, including Acer, Dell, Fujitsu, Gigabyte, HP, Intel, Lenovo and Supermicro. With the private key, an attacker could rewrite the KEK and signature databases and bypass Secure Boot (BleepingComputer). The lesson: reference code flows into production unchanged unless someone checks.
Leaked signing keys: MSI (2023)
After a ransomware attack on MSI in 2023, the Money Message group leaked data that, according to Binarly's analysis, included private firmware image signing keys for 57 MSI products and Intel Boot Guard keys for 116 MSI products. Boot Guard is the processor feature that refuses firmware not signed with the maker's key (Help Net Security). The lesson: signing keys are crown jewels and belong in hardware security modules with a rotation plan.
Compromised update channels: ShadowHammer (2019)
Kaspersky's GReAT team described Operation ShadowHammer, in which attackers distributed a trojanised ASUS Live Update utility signed with legitimate ASUSTeK certificates. The malware targeted a hardcoded list of network adapter MAC addresses; Kaspersky extracted more than 600 unique MAC addresses from over 200 samples (Securelist). The lesson: an updater is a privileged distribution channel, which makes it a target.
Vulnerable privileged drivers: Dell dbutil (2021)
In May 2021, SentinelLabs reported five high severity flaws in Dell's firmware update driver, present in Dell PCs, tablets and notebooks shipped since 2009, potentially hundreds of millions of devices (Threatpost). The flaws allowed local privilege escalation to kernel level.
Firmware-dropped updaters: Gigabyte (2023)
Eclypsium found that firmware on Gigabyte systems dropped and ran a Windows executable during startup, which then downloaded and executed further payloads insecurely. The affected model list grew from 271 to 406 as monitoring continued (Eclypsium). Gigabyte published updates.
Preinstalled software: Superfish (2015)
In February 2015, Lenovo laptops were found shipping with Superfish adware, which installed a root certificate to inject ads into HTTPS pages. The EFF's SSL Observatory saw 44,000 Superfish certificates, all signed by the same root (EFF).
Component firmware: SSDs and Wi-Fi
The self-encrypting SSD research and Broadpwn both showed that component firmware, written by a supplier the laptop brand does not control, can undermine the whole machine.
The common thread. None of these was one laptop's problem. Each travelled down the supply chain into products from many brands, or across a whole fleet through a trusted update channel. Firmware specialists, including Binarly and Eclypsium, did much of this public research.
What should OEMs, ODMs and component makers do?
Treat firmware, drivers and preinstalled software like any other software product: publish SBOMs per release, scan the binaries you receive and ship, rank vulnerabilities by reachability and exploitation signals, protect signing keys and record build provenance, track licences, manage supplier risk continuously, and be able to patch without waiting for upstream.
None of this is exotic. These are the software supply chain disciplines application teams adopted over the past few years, applied to firmware, drivers and preinstalled software.
Publish SBOMs for firmware and drivers
A software bill of materials (SBOM) lists the components inside software, with versions and identifiers. The two main formats are CycloneDX, from OWASP, and SPDX, from the Linux Foundation, which is also the international standard ISO/IEC 5962:2021. CycloneDX has a dedicated firmware component type and recommends describing a hardware device and its firmware as separate components, and it also supports hardware bills of materials. The useful unit is one SBOM per release of each BIOS, EC, PD controller firmware, wireless package, GPU driver and OEM utility. Fleet buyers increasingly ask for them, and they speed up your own vulnerability response. Our comparison of CycloneDX and SPDX goes deeper.
Scan the binaries and firmware images you ship
Much of what ships arrives as binaries: IBV modules, chip vendor reference code, third party drivers, SDKs inside utilities. Source scanning cannot see inside them. Binary analysis can identify embedded libraries and versions, which is often the only honest inventory of code you did not build (what is binary composition analysis). Know the limits: compressed, encrypted or heavily obfuscated images and statically linked code can hide components from any binary scanner, and firmware images often need unpacking before analysis. Pair binary scanning with supplier SBOMs.
Rank vulnerabilities by reachability and exploitation
A firmware image can map to hundreds of known vulnerabilities, many in code paths the product never uses. Ranking by reachability, plus exploitation signals such as known exploited lists and EPSS scores (the Exploit Prediction Scoring System), lets a small firmware team spend its time on the few that matter.
Sign everything and keep build provenance
Keep signing keys in hardware security modules, never ship test keys, and rotate when anything leaks. Record build provenance with frameworks such as SLSA and tools such as Sigstore and in-toto, so you can prove an update came from your pipeline. The PKfail and MSI cases above are what happens when key management is left to chance. For the Secure Boot side, see Secure Boot, UEFI and software supply chain links.
Track licences
Firmware and drivers carry open source under many licences, some with source disclosure obligations. A licence inventory per release keeps attribution notices accurate and customer legal reviews short.
Manage supplier and partner risk continuously
Ask IBVs, chip vendors, module makers and software partners for SBOMs and disclosure commitments. Score them and monitor them continuously, not once a year in a questionnaire.
Patch without waiting for upstream
The hardest firmware problem is that the fix often belongs to someone else. The vulnerable library sits inside an IBV module inside a chip vendor package, and the OEM waits in line. Teams that can patch the vulnerable component in their own build ship fixes in days instead of quarters.
How Safeguard helps hardware and firmware teams
Safeguard covers the whole software supply chain of a hardware product in one platform: source and binary inventory, disk and VM image analysis, SBOMs in CycloneDX and SPDX, vulnerability ranking with reachability, fix pull requests, patched open source packages, supplier risk scoring, compliance evidence and runtime guardrails for the servers that build and ship your updates.
Hardware companies that take this seriously often end up with a stack of separate tools: one for source SCA, one for static analysis, one for secrets, a binary analysis product, an SBOM manager, a GRC tool for audits and a runtime agent. Each keeps its own inventory. Safeguard does that work end to end, from the first inventory through to the merged fix and the audit evidence, with one inventory and one vulnerability model.
Figure 14. One platform or separate tools, capability by capability. Safeguard needs raw firmware images extracted first.
See inside the binaries and images you ship and receive
In the Safeguard console, Integrations > Upload App Binary accepts compiled software such as Windows EXE, MSI and DLL files, Android APKs and iOS IPAs, as well as VM and disk images (QCOW2, VMDK, VHD and OVA) and container tarballs. Safeguard unpacks the file, identifies embedded libraries and versions, maps them to known vulnerabilities with EPSS and known exploited enrichment, and records licences. The result becomes a project with a full SBOM. That suits OEM utilities, driver installers, update tools, recovery images and vendor SDKs where you never had the source. Raw UEFI firmware images may need to be extracted into their component files first; Safeguard does not claim to parse raw UEFI images directly. The Safeguard local runner CLI can run scans on your own machines. The usual binary limits apply: heavy obfuscation, encryption or unusual compression can give incomplete results, and statically linked code may show few components. More in our guide to scanning app binaries with Safeguard.
Source scanning where you own the code
For firmware, EC code, drivers and utilities you build yourself, Safeguard runs software composition analysis across the full transitive dependency tree with reachability analysis, so vulnerabilities your code can actually reach rise to the top. SAST checks your own code, and secrets scanning catches keys and tokens before they ship. For a hardware company, that protects the signing material whose loss turns a bad day into a recall.
SBOMs your customers can use
Every project produces an SBOM you can export in CycloneDX or SPDX, among many other formats, so you can hand one to a fleet buyer for every release. Attestation and signing with SLSA, Sigstore and in-toto give the SBOM and the build provenance behind it.
Fix it without waiting for upstream
This is where Safeguard differs most from a scanner. For code in your repositories, Griffin, Safeguard's remediation model, opens a fix pull request that your own CI builds and tests before anyone merges it, and your policies decide what can merge. For open source components where upstream has not shipped a fix, or the fix sits in a version you cannot move to, Safeguard Gold provides patched, hardened builds of those packages, and Safeguard can fork and patch the vulnerable package so your next build pulls a fixed version. For a firmware or software team stuck behind a supplier's release schedule, that is the difference between shipping the fix in the next build and waiting a quarter.
Supplier risk, compliance evidence and runtime guardrails
Safeguard's Third-Party Risk Manager lets you request SBOMs from suppliers, score them and monitor them continuously, which fits a hardware supply base of IBVs, chip vendors and module makers (more on Safeguard TPRM). The compliance suite collects evidence for frameworks such as SOC 2 and ISO 27001 from the same scans. Guard adds runtime guardrails on the Linux servers that build, sign and distribute your firmware and updates, inspecting system calls, library calls and network egress, so a tampered build or update server is noticed early. ShadowHammer is the case for watching those servers.
Deploy where your code lives
Firmware source and signing infrastructure are sensitive. Safeguard runs as SaaS in US and EU regions, in your own VPC or fully on premises, and can run in Zero AI mode with no language model in the loop, or with your own model. Safeguard is SOC 2 Type I and Type II audited.
How this compares
Teams often pair a source SCA tool such as Snyk or Black Duck with a firmware specialist such as Binarly, Eclypsium or Finite State (which describes itself as a product security platform for connected devices), plus a GRC platform for audits. Those are capable products, and firmware specialists produced much of the public research cited here; for raw firmware image analysis they go deeper. Safeguard's case is consolidation and remediation: one inventory across source, binaries and images, one vulnerability model with reachability, fix pull requests and patched packages instead of tickets, and supplier risk and compliance evidence from the same data. Safeguard can also sit alongside an existing firmware analysis tool and take over the fixing and SBOM delivery. For broader context, see our firmware supply chain security guide and hardware supply chain trust boundaries.
For partners in the hardware ecosystem
ODMs, EMS providers, independent firmware vendors, system integrators and component makers sit exactly where software risk enters this chain. If you want to offer customers SBOMs, firmware and software vulnerability management, and fixes as part of your service, you can partner with Safeguard. Details are at safeguard.sh/company/partners.
The takeaway
A laptop is one of the most global products anyone buys. Quartz from one country becomes a wafer in another, a chip in a third and a motherboard in a fourth, beside a battery whose cobalt was mined on a different continent. A teardown shows that plainly. What it does not show is that every part also brings code, with its own suppliers, open source dependencies and vulnerabilities, and that the code keeps changing for years after the hardware is fixed. The companies that manage that software chain as carefully as the physical one can tell a customer, with evidence, exactly what is running on the machine they bought.
Frequently asked questions
How is a laptop made step by step?
Component makers produce the processor, memory, storage, display, battery and smaller parts from raw materials. A PCB fabricator makes the bare motherboard and the ODM's SMT line populates it. Final assembly installs the board, cooling, battery, storage and display in the chassis. Each unit is tested and burned in, its firmware is provisioned, the operating system is imaged, and it is packed and shipped.
What are the main parts of a laptop?
The processor (SoC), memory, SSD, motherboard with power circuits, display, lithium-ion battery, chassis, keyboard and trackpad, cooling system with heat pipes and fans, Wi-Fi and Bluetooth module, webcam, microphones and speakers, ports, and an external charger. Each of those parts also runs firmware of its own.
Who makes laptops for Dell and HP?
Mostly Taiwanese ODMs. DigiTimes reported in 2023 that Dell mainly outsources manufacturing to Compal and Wistron, and TrendForce reported in 2025 that HP worked with Quanta and Inventec on new lines in Thailand. Pairings change with each product generation and are rarely confirmed by the brands.
Where are most laptops made?
In mainland China. TrendForce estimates only about 24 percent of notebook production happened outside China in 2025, and expects about 21 percent in 2026. Vietnam and Thailand are the largest alternatives, with smaller volumes in Mexico, India, Indonesia and Brazil. Components come mainly from East Asia.
How much does it cost to make a laptop?
It depends on the model, and full BOMs are rarely published. In TrendForce's benchmark US$900 notebook, the CPU, DRAM and SSD were about 45 percent of the bill of materials in early 2025 and 68 percent in late 2026. In a MacBook Air M3, TechInsights put the processor at 41 percent and the display at 18 percent.
How are laptop batteries made?
Lithium, cobalt, nickel and graphite are mined and refined into battery materials. Cell makers coat electrodes on foil, press and cut them, wind or stack them with a separator, fill them with electrolyte in a dry room and run formation charges and ageing for up to three weeks. Pack makers match cells and add a BMS board with firmware.
What firmware is inside a laptop?
UEFI system firmware, processor microcode and security processor firmware (such as Intel CSME or AMD PSP), embedded controller firmware, SSD controller firmware, Wi-Fi and Bluetooth firmware, TPM firmware, GPU video BIOS, USB-C Power Delivery and retimer firmware, and touchpad, camera and battery fuel gauge firmware. The operating system, drivers and OEM utilities sit on top.
Can you get an SBOM for laptop firmware?
Yes. CycloneDX and SPDX can both describe firmware, and CycloneDX has a dedicated firmware component type. The most accurate firmware SBOMs combine build system data, supplier SBOMs and binary analysis of components that arrive only as binaries. Ask your laptop or component supplier for one per firmware release.
Sources
- TrendForce, notebook BOM core components rise to 68% (Sep 2026): https://www.trendforce.com/presscenter/news/20260904-13217.html
- PC Gamer, TrendForce on DRAM and SSD share of notebook BOM: https://www.pcgamer.com/hardware/gaming-laptops/as-if-pc-hardware-news-couldnt-get-any-gloomier-one-research-report-suggests-mainstream-laptop-prices-could-rise-by-as-much-as-40-percent
- TechInsights, Apple MacBook Air A3113 teardown and BOM comparison: https://www.techinsights.com/blog/apple-macbook-air-a3113-teardown
- BloombergNEF, lithium-ion battery pack prices fall to $108 per kWh (Dec 2025): https://about.bnef.com/insights/clean-transport/lithium-ion-battery-pack-prices-fall-to-108-per-kilowatt-hour
- Tom's Hardware, TSMC 3nm wafer pricing analyst estimate: https://www.tomshardware.com/tech-industry/tsmcs-wafer-pricing-now-usd18-000-for-a-3nm-wafer-increased-by-over-3x-in-10-years-analyst
- Quartr, Compal Electronics Q4 2025 earnings summary: https://quartr.com/events/compal-electronics-inc-2324-q4-2025_FT523ub2
- Taipei Times, Compal reports best gross margin in 15 years (May 2025): https://www.taipeitimes.com/News/biz/archives/2025/05/15/2003836887
- HP Inc., fiscal 2025 full year and fourth quarter results: https://www.hp.com/us-en/newsroom/press-releases/2025/hp-inc-reports-fiscal-2025-full-year-and-fourth-quarter-results.html
- Lenovo, Q2 FY2025/26 results press release: https://investor.lenovo.com/en/financial/results/press_2526_q2.pdf
- TrendForce, notebook production in Vietnam, Thailand and localised markets (Sep 2025): https://www.trendforce.com/presscenter/news/20250917-12717.html
- TrendForce News, HP, ASUS, Acer shift some PC production back to China (Oct 2026): https://trendforce.com/news/2026/10/28/news-ai-driven-component-costs-reportedly-push-hp-asus-acer-to-shift-some-pc-production-back-to-china
- DigiTimes, notebook brands' production shifts and ODM partners (Aug 2023): https://www.digitimes.com/news/a20230821PD207.html
- Air Cargo News, laptop air cargo out of Vietnam (Jun 2025): https://www.aircargonews.net/data-news/air-cargo-sees-laptop-demand-out-of-vietnam-surge/1080254.article
- IEA, Global Critical Minerals Outlook 2025, executive summary: https://www.iea.org/reports/global-critical-minerals-outlook-2025/executive-summary
- Cobalt Institute, Cobalt factsheet (Jul 2025): https://www.cobaltinstitute.org/wp-content/uploads/2025/07/Cobalt-Factsheet_July-2025.pdf
- Evertiq, TrendForce 3Q25 DRAM revenue and market shares: https://evertiq.com/design/2025-11-26-global-dram-revenue-jumps-309-in-3q25
- TrendForce News, PCB production shares by region (May 2023): https://www.trendforce.com/news/?p=1648
- Wikipedia, Silicon (production): https://en.wikipedia.org/wiki/Silicon
- Wikipedia, Polycrystalline silicon: https://en.wikipedia.org/wiki/Polycrystalline_silicon
- Wikipedia, Czochralski method: https://en.wikipedia.org/wiki/Czochralski_method
- Wikipedia, Wafer (electronics): https://en.wikipedia.org/wiki/Wafer_(electronics)
- Wikipedia, Semiconductor device fabrication: https://en.wikipedia.org/wiki/Semiconductor_device_fabrication
- Wikipedia, Shin-Etsu Chemical: https://en.wikipedia.org/wiki/Shin-Etsu_Chemical
- Wikipedia, SUMCO: https://en.wikipedia.org/wiki/Sumco
- Wikipedia, GlobalWafers: https://en.wikipedia.org/wiki/GlobalWafers
- Wikipedia, Meteor Lake: https://en.wikipedia.org/wiki/Meteor_Lake
- Wikipedia, Lunar Lake: https://en.wikipedia.org/wiki/Lunar_Lake
- Wikipedia, Intel Management Engine: https://en.wikipedia.org/wiki/Intel_Management_Engine
- Wikipedia, AMD Platform Security Processor: https://en.wikipedia.org/wiki/AMD_Platform_Security_Processor
- Wikipedia, Dynamic random-access memory: https://en.wikipedia.org/wiki/Dynamic_random-access_memory
- SK hynix, mass production of 321-high NAND (Nov 2024): https://news.skhynix.com/sk-hynix-starts-mass-production-of-worlds-first-321-high-nand/
- Wikipedia, Solidigm: https://en.wikipedia.org/wiki/Solidigm
- Wikipedia, Sandisk (spin-off completed 24 Feb 2025): https://en.wikipedia.org/wiki/Sandisk
- Wikipedia, Phison: https://en.wikipedia.org/wiki/Phison
- Wikipedia, Silicon Motion: https://en.wikipedia.org/wiki/Silicon_Motion
- Meijer and van Gastel, Self-Encrypting Deception, IEEE S&P 2019: https://research.ou.nl/en/publications/self-encrypting-deception-weaknesses-in-the-encryption-of-solid-s/
- Wikipedia, Printed circuit board manufacturing: https://en.wikipedia.org/wiki/Printed_circuit_board_manufacturing
- Wikipedia, Surface-mount technology: https://en.wikipedia.org/wiki/Surface-mount_technology
- Wikipedia, Ceramic capacitor: https://en.wikipedia.org/wiki/Ceramic_capacitor
- Wikipedia, Samsung Electro-Mechanics: https://en.wikipedia.org/wiki/Samsung_Electro-Mechanics
- Wikipedia, Taiyo Yuden: https://en.wikipedia.org/wiki/Taiyo_Yuden
- Wikipedia, OLED: https://en.wikipedia.org/wiki/OLED
- Wikipedia, Thin-film-transistor liquid-crystal display: https://en.wikipedia.org/wiki/Thin-film_transistor_liquid-crystal_display
- Wikipedia, List of flat panel display manufacturers: https://en.wikipedia.org/wiki/List_of_flat_panel_display_manufacturers
- Wikipedia, Samsung Display: https://en.wikipedia.org/wiki/Samsung_Display
- Battery Design, battery cell manufacturing process: https://www.batterydesign.net/manufacture/cell-manufacturing/battery-cell-manufacturing-process/
- Wikipedia, Lithium-ion battery (manufacturing and dry rooms): https://en.wikipedia.org/wiki/Lithium-ion_battery
- Wikipedia, Amperex Technology Limited (ATL): https://en.wikipedia.org/wiki/Amperex_Technology_Limited
- LG Energy Solution, smart device batteries: https://www.lgensol.com/en/business/smart-device
- Wikipedia, Sunwoda: https://en.wikipedia.org/wiki/Sunwoda
- CENS, Simplo and DynaPack notebook battery modules (2005): https://cens.com/cens/html/en/news/news_inner_10191.html
- Wikipedia, Bayer process: https://en.wikipedia.org/wiki/Bayer_process
- Wikipedia, Hall-Heroult process: https://en.wikipedia.org/wiki/Hall%E2%80%93H%C3%A9roult_process
- Wikipedia, Anodizing: https://en.wikipedia.org/wiki/Anodizing
- Wikipedia, Catcher Technology: https://en.wikipedia.org/wiki/Catcher_Technology
- Intel Partner Showcase, BYD Electronics: https://intel.com/content/www/us/en/partner/showcase/storefront/a5S3b0000004tWbEAI/byd-company-limited.html
- Wikipedia, Keyboard technology: https://en.wikipedia.org/wiki/Keyboard_technology
- Microsoft Learn, Precision Touchpad devices: https://learn.microsoft.com/en-us/windows-hardware/design/component-guidelines/touchpad-devices
- DigiTimes, keyboard makers coverage (Sunrex, Chicony): https://digitimes.com/tag/keyboard/0011816.html
- Wikipedia, Synaptics: https://en.wikipedia.org/wiki/Synaptics
- Wikipedia, Heat pipe: https://en.wikipedia.org/wiki/Heat_pipe
- DigiTimes, notebook cooling module makers coverage: https://digitimes.com/tag/cooling_module/0082747.html
- DigiTimes, Auras coverage: https://digitimes.com/tag/auras/0054226.html
- Wikipedia, Delta Electronics: https://en.wikipedia.org/wiki/Delta_Electronics
- Wikipedia, Sony Semiconductor Solutions: https://en.wikipedia.org/wiki/Sony_Semiconductor_Solutions
- Wikipedia, OmniVision Technologies: https://en.wikipedia.org/wiki/OmniVision_Technologies
- Wikipedia, Samsung ISOCELL: https://en.wikipedia.org/wiki/Samsung_ISOCELL
- Wikipedia, Sunny Optical: https://en.wikipedia.org/wiki/Sunny_Optical
- Wikipedia, LG Innotek: https://en.wikipedia.org/wiki/LG_Innotek
- Wikipedia, Microelectromechanical systems (MEMS microphones): https://en.wikipedia.org/wiki/Microelectromechanical_systems
- MacRumors, Apple custom Bluetooth and Wi-Fi chip replacing Broadcom (Dec 2024): https://www.macrumors.com/2024/12/12/apple-custom-bluetooth-wifi-chip/
- linux-firmware repository: https://git.kernel.org/pub/scm/linux/kernel/git/firmware/linux-firmware.git
- Exodus Intelligence, Broadpwn (Jul 2017): https://blog.exodusintel.com/2017/07/26/broadpwn/
- Wikipedia, Thunderbolt (interface): https://en.wikipedia.org/wiki/Thunderbolt_(interface)
- Wikipedia, Gallium nitride (GaN chargers): https://en.wikipedia.org/wiki/Gallium_nitride
- Salcomp, manufacturing: https://salcomp.com/manufacturing
- Delta Electronics, notebook power adapters: https://www.deltaww.com/d/Power-Adapter
- Wikipedia, Compal Electronics: https://en.wikipedia.org/wiki/Compal_Electronics
- Wikipedia, Inventec: https://en.wikipedia.org/wiki/Inventec
- Wikipedia, Wistron: https://en.wikipedia.org/wiki/Wistron
- Wikipedia, Quanta Computer: https://en.wikipedia.org/wiki/Quanta_Computer
- Wikipedia, Lenovo (manufacturing operations): https://en.wikipedia.org/wiki/Lenovo
- Microsoft Learn, Windows desktop manufacturing: https://learn.microsoft.com/en-us/windows-hardware/manufacture/desktop/
- Wikipedia, Gigabyte Technology: https://en.wikipedia.org/wiki/Gigabyte_Technology
- Wikipedia, ASRock: https://en.wikipedia.org/wiki/ASRock
- Hardware Busters, who really makes your power supply: https://hwbusters.com/psus/who-really-makes-your-power-supply/
- iFixit, laptop repairability scores: https://www.ifixit.com/repairability/laptop-repairability-scores
- UNITAR, Global E-waste Monitor 2024 press release: https://unitar.org/about/news-stories/press/global-e-waste-monitor-2024-electronic-waste-rising-five-times-faster-documented-e-waste-recycling
- TianoCore EDK II: https://github.com/tianocore/edk2
- coreboot documentation: https://doc.coreboot.org/
- Chromium OS embedded controller firmware: https://chromium.googlesource.com/chromiumos/platform/ec
- ITE profile at Edom Technology: https://www.edomtech.com/en/manufacturers-detail/ite/
- Wikipedia, Nuvoton Technology: https://en.wikipedia.org/wiki/Nuvoton_Technology_Corporation
- Microsoft Learn, Microsoft Pluton security processor: https://learn.microsoft.com/en-us/windows/security/hardware-security/pluton/microsoft-pluton-security-processor
- Security Affairs, ROCA vulnerability CVE-2017-15361: https://securityaffairs.com/64401/breaking-news/roca-vulnerability-cve-2017-15361.html
- The Hacker News, LogoFAIL UEFI vulnerabilities (Dec 2023): https://thehackernews.com/2023/12/logofail-uefi-vulnerabilities-expose.html
- BleepingComputer, PKfail Secure Boot bypass (Jul 2024): https://www.bleepingcomputer.com/news/security/pkfail-secure-boot-bypass-lets-attackers-install-uefi-malware/
- Help Net Security, MSI firmware and Intel Boot Guard keys leaked (May 2023): https://www.helpnetsecurity.com/2023/05/08/msi-private-keys-leaked/
- Securelist, Operation ShadowHammer (Apr 2019): https://securelist.com/operation-shadowhammer-a-high-profile-supply-chain-attack/90380/
- Threatpost, Dell firmware update driver flaws (May 2021): https://threatpost.com/dell-kernel-privilege-bugs/165843/
- Eclypsium, supply chain risk from Gigabyte App Center backdoor (2023): https://eclypsium.com/blog/supply-chain-risk-from-gigabyte-app-center-backdoor/
- EFF, Lenovo is breaking HTTPS security (Superfish, Feb 2015): https://www.eff.org/deeplinks/2015/02/further-evidence-lenovo-breaking-https-security-its-laptops
- SPDX, overview (ISO/IEC 5962:2021): https://spdx.dev/about/overview/
- CycloneDX 1.6 JSON reference (firmware component type): https://cyclonedx.org/docs/1.6/json/
- CycloneDX, hardware bill of materials: https://cyclonedx.org/capabilities/hbom/
- SLSA, about: https://slsa.dev/spec/v1.0/about
- FIRST, Exploit Prediction Scoring System: https://www.first.org/epss/
- Finite State, about: https://finitestate.io/about
- Safeguard, scan app binaries (EXE, MSI, APK and IPA): https://safeguard.sh/resources/blog/scan-app-binaries-exe-msi-apk-and-ipa-with-safeguard